48
OVEN FUNCTION CONTROL KNOB (FIG. 1)
Oven Light - The oven light will be on without
any cooking function
Conventional cooking - The heat comes from
both the top and bottom element, ensuring
even heating inside the oven.
Top heating element - The heat comes from
the top of the oven only.
Bottom heating element - The heat comes
from the bottom of the oven only.
-
Fan cooking - This allows you to roast or roast
and bake simoultaneously using any shelf,
without flavour transference.
Inner grill element only - can be used for grilling
small quantities.
Double Grill - The full grill element will be on.
Thermal Grilling - This function offers an alter-
native method of cooking food items, normally
associated with conventional grilling. The grill
element and the oven fan operate together,
circulating hot air around the food.
Defrost Setting - This setting is intended to
assist in thawing of frozen food.
THERMOSTAT CONTROL KNOB (FIG. 2)
Turn the thermostat control knob clockwise to select
temperatures between 50°C and 250°C (MAX).
OVEN CONTROL LIGHT (if present)
This yellow light will come on when the oven function
control knob is set on a function.
Fig. 1
Fig. 2
THERMOSTAT CONTROL LIGHT
Once the oven temperature has been selected, the
Themostat Control Light will come on and remain on until
the oven has reached the correct setting; after that, it will
go on and off with the thermostat, showing how the
temperature is being maintained.
THE SAFETY THERMOSTAT
This oven is provided with a safety thermostat. In case of
malfunctioning of the main thermostat, and consequent
over-heating, the safety device will stop the power supply
to the appliance. If this happens, call your local Zanussi
Service Centre. Under no circumstances should you
attempt to repair the appliance yourself.
THE COOLING FAN FOR THE CONTROLS
This oven is provided with a cooling fan, meant to keep the
front panel, the knobs and the oven door handle cool. This
fan may run on after the oven or grill is switched off, until
a normal temperature is reached.
CATALYTIC SELF-CLEANING SIDE
PANELS (ZBC 741)
(accessory available on request)
Catalytic self cleaning panels can be installed onto the
sides of the oven. These panels, at normal cooking
temperature, can turn the splashes of fat into a light
residual powder.
This powder must be removed with a damp sponge after
the oven has cooled down, in order to keep the catalytic
panels in good condition.
All cookings must be carried out
with the oven door closed
FO0282
0
FO0293
100
150
200
MAX
50
FO0347
0
