Zanussi IT 5614, Инструкция пользователя

Страница: 23 / 24

23
Adjusting the door balance
After fitting the door panel, the adjustment of the door
balance may be necessary.
The door of the dishwasher is balanced when it is
open in any position.
For this purpose use the two front screws.
- Open the door.
- Remove the caps and screw or unscrew the screws.
In this way the tension of the door balancing springs
is increased or decreased respectively.
- Insert the caps again.
Important!
The weight of the panel should be within the
limits given in "The furniture door"
otherwise balancing the door will not be
possible
Kitchen plinth adjustment
To allow correct opening of the door it is sometimes
necessary to cut the kitchen plinth. Refer to the cutting
table.
According to dimensions (a) and (b) as shown on the
figure, you will find on the following table the depth (x)
of the cut to be made on the plinth.
The dimensions (a) and (b) of the table are those most
frequently used in the kitchen furnitures.
45
°
II104
II59
a
b
II15
170 160 150 140 130 120 110 100
136 131 125 118 110 100 93 85
135 131 125 118 110 102 92 85
137 132 125 118 110 102 94 85
138 134 128 120 110 104 95 85
139 130 124 115 105 98 88
138 129 120 110 100 90
135 125 115 105 95
/
/ /
/
40
50
60
70
80
90
100 / /
Height (a)*
Depth (
b
)*
X
X
450 mm
minimum
Dimensions of the cut on the plinth
(
*
)
dimensions in mm