6
INSTRUCTIONS FOR USER
INSTALLATION
All operations relating to installation, regulation and adaption to the type of gas supplied, must be
carried out by qualified personnel, according to the regulations in force.
Specific instructions are contained in the notices reserved for the installer.
USE
Hob control switch
The switches for the gas burners of the hob are
situated on the control panel. The regulating
switch of the burners can only be turned in an
anti-clockwise direction to the small flame sign
and vice-versa in the opposite direction.
no emission of gas
maximum emission of gas
minimum emission of gas
Ignition of burners
To ignite a burner, before positioning the
saucepan, approach with a flame, push the
corresponding switch in completely and turn in an
anti-clockwise direction to the maximum position.
Then regulate the flame as required.
In models having automatic ignition work the
appropriate button, marked by a small spark, and
then open the tap completely.
In models having a security device turn the
corresponding switch in an anti-clockwise
direction to the maximum position, press in fully
and keep pressed for approximately 5 seconds
until the security valve automatically maintains
the flame alight.
IMPORTANT
If after a few attempts the burner does not ignite,
check that the baffle and its cap are correctly
positioned.
To interrupt the supply of gas, turn the switch in a
clockwise direction to the position « ».
For a minor consumption of gas and a better
efficiency it is advisable to use pans having a
diameter suitable to the burners, as shown in the
table. It is also advisable that, as soon as a liquid
starts to boil you should lower the flame
sufficiently to maintain simmering point. In case
the burner flame accidentally goes out, close the
command switch and try to ignite again after not
less than 1 minute.
During cooking, when using fats or oils, take
particular care as they can, when over-heated,
self-ignite.
FO 0252
Minimum and maximum diametres of recipients
which can be placed on the burners.
Burner
Min. diam.
Max. diam.
Rapid (large)
160 mm
240 mm
Semi-rapid (medium)
120 mm
220 mm
Auxiliary (small)
80 mm
160 mm
