6
6
Operating Sequence
Before your first wash, we recommend that
you run a cotton cycle at 60°C, without any
laundry in the machine, to remove any
manufacturing residue from the drum and tub.
Pour 1/2 a measure of detergent into the
dispenser drawer and start the machine.
1. Load the laundry
Open the door.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible.
Close the door.
Do not overload the washing machine, but always try
to use it utmost capacity in accordance with the type of
fabric. Reduce the quantity when washing very dirty or
fluffy laundry.
2. Measure out the detergent
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent recommended by
the manufacturer in a graduated cup and pour it into the
main wash compartment
.
If you wish to carry out a prewash(*), pour detergent
into the appropriate compartment marked
(*) Prewash is available in programme “1”.
3. Measure out the additive
If required, pour fabric softener into the compartment
marked
(the amount used must not exceed the
«MAX» mark in the drawer).
Close the drawer gently.
4. Select the temperature
Turn the dial to the desired temperature.
i
P0004
AL025
AL023
9 0
P0345
Содержание FLS 579 C
Страница 20: ...EPESL Z 3 4 5 6 7 8 9 10 11 12 98 ...