welcome
4.
Select the required options
Depress the rinse hold, spin reduction or the half load button, if required.
5.
Select the required programme
Turn the programme selector dial clockwise to the required programme.
6.
Start up the machine
Before starting the machine check that:
•
The appliance is plugged in.
•
The door and detergent dispenser draw are properly closed.
•
The machine has not been over-loaded.
To start the machine, depress the On/Off button; the mains-on light will illuminate and the machine starts operating.
7.
At the end of the programme
•
The machine stops automatically.
•
If you have depressed the RINSE HOLD button, the machine will stop with the water left in the tub, to prevent
the fabric from creasing. To drain the water and spin, release the same button. To drain only, select programme
“P”.
•
The door is controlled by a safety device which releases 2 minutes after the end of the programme.
•
Switch the machine off by depressing the ON/OFF button again. The mains-on light goes out.
•
When the programme has finished you are advised to unplug the appliance and turn off the water taps.