Zanussi FL1600, Инструкция пользователя

Страница: 8 / 27

8
7 “Special Programmes” button
Pressing this button selects the following options:
- EXTRA RINSE: can be selected with all
programmes except the wool programme. The
machine performs 4 rinses instead of 3.
This option is recommended for people who are
allergic to detergents and in areas where the water is
very soft.
This option can only be selected after having
pressed the FABRICS button to select the required
wash programme.
- SOAK: select this option for heavily soiled laundry.
This function cannot be used with the wool
programme. The machine performs a soak at 40°C
and stops with the water in the drum. The water can
be emptied out in 2 ways:
- empty only by pressing the START/PAUSE button;
- empty and spin using the SPIN SPEED and
START/PAUSE buttons.
If the water is not emptied out within 18 hours, the
machine empties automatically. The drum turns from
time to time during soaking.
At the end of the soak, and after having emptied out
the water (the three zeros on the display flash), select
the required wash programme or call one up using
the “memory” buttons, then start the machine by
pressing the START/PAUSE button.
- RINSES: with this option, it is possible to rinse and
spin garments which have been washed by hand,
such as synthetics or delicates and types of wool
which are not machine washable.
The machine performs 3 delicate rinses with a high
water level, followed by a final spin at 700 rpm. It is
of course also possible to select a higher spin speed
using the appropriate button.
Important: if you wash cotton fabrics by hand and
select a spin speed of 1600 rpm, the machine will
perform 3 rinses with a low water level, a number of
intermediate spins and a final spin at 1600 rpm;
particularly recommended for cottons.
- SPIN: when this option is selected, the machine
performs a spin at 700 rpm. Different spin speeds
can be selected by pressing the appropriate button,
but always take into account the type of fabric
washed.
- DRAIN: this programme can be selected to empty
out the water (e.g. for programmes with which the
RINSE HOLD option has been selected).
8 FRESHEN UP button
This is a complete programme in its own right, that is
not compatible with any of the other options, except
DELAY START. For use with laundry which is lightly
soiled or which needs freshening up (max. 2 kg). The
machine performs a 30 minute wash cycle at 30°C, with
a final spin at 700 rpm.
9 TIME TO FINISH display
This display provides the following information:
- three flashing dashes
appear immediately after pressing the ON/OFF
button and indicate that the machine is ready to
receive instructions for the required wash
programme;
- Duration of the selected wash programme,
calculated automatically on the basis of the
maximum recommended load for each type of
fabric. The figures on the display flash until the
machine is started with the START button.
After the programme has started, the time remaining
is updated every 10 minutes, and every 5 minutes
during the last 20 minutes.
When the programme has finished, after the door
lock has released, three flashing zeros are displayed.
- Delayed start, programmed using the special button
(11).
The selected delay (19 hours max.) is indicated in
the display. The countdown is updated every hour,
and every 5 minutes during the last hour.
- PAUSE: when the START/PAUSE is pressed while
a wash programme is running, the figures in the
display, which indicate the time remaining, start to
flash.
- Machine heating phase. A dot to the right of the
figures in the display indicates that the machine is
heating the water.
- Incorrect option selection. If an option which is not
compatible with the set wash programme is selected,
the message Err is displayed.