8
Use
Programme Option buttons
Depending on the programme, different functions
can be combined.
These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button
.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the pilot lights flash
for about 2 seconds. The buzzer sounds.
1 “Options” button
Press this button to select the following options:
●
Prewash
Select this option if you wish your laundry to be
prewashed at 30°C before the main wash (
not
available for wool
).
The prewash ends with a short spin in
programmes for cotton and synthetic fabrics,
whereas in the programme for delicate fabrics the
water is only drained.
●
Quick wash
This button allows you to select the QUICK
WASH function, for laundry that is only slightly
soiled (
not for wool and together with
function
).
The washing time will be reduced according to
the type of fabric and the selected temperature.
Max. load for cotton 3.5 kg.
2 “ECO” button
a) By depressing this button together with
programme "Cotton 90°C", the temperature
decreases until 67°C and the washing time
increases by 22 minutes.
By depressing this button together with
programme "Synthetics 60°C", the temperature
decreases until 40°C and the washing time
increases by 10 minutes.
This function can be used for normally soiled
laundry in order to save energy.
b) In order to obtain washing class "
A
" you have to
press this button together with programmes
"Cotton 60°C" and "Cotton 40°C". The washing
time increases by 10 minutes at 60°C and by 35
minutes at 40°C.
3 “Extra Rinse” button
The Extra Rinse option can be selected with all
programmes
except the wool programme
. The
machine will perform 2 additional rinses. This option
is recommended for people who are allergic to
detergents, and in areas where the water is very soft.
4 “Rinse Hold” button
When selecting this option the water of the last rinse
is not emptied out, to prevent the fabrics from
creasing.
At the end of the programme the pilot light “
End
”
illuminates and the door locked light is on. To
drain water, proceed as follows:
●
turn the programme selector dial to position “
O
”;
●
select
programme (drain)
or (short
spin);
●
press START/PAUSE button.
You can reduce the spin speed by means of the
selector dial
to adapt the spin speed to the
laundry.
1
2
3
4
5
6
7
8
FE 1025 G
Control panel
132992140gb.qxd 3/27/03 10:15 AM Pagina 8 (Nero/Process Black pellicola)