Zanussi DWS 935 Скачать руководство пользователя

Страница: 20 / 24

Any electrical work required to install this
appliance should be carried out by a
qualified electrician or competent person.

Any plumbing work required to install this
appliance should be carried out by a
qualified plumber or competent person.

Remove all packaging before positioning the
machine.

If possible, position the machine next to a water tap
and a drain.

Water supply connections

This dishwasher must be plumbed into a cold water
supply.

The water pressure must be within the limits given in
the technical specifications.

Your local Water Authority will advise you on the
average mains pressure in your area.

The dishwasher features fill and drain hoses which
can be turned either to the left or the right to suit the
installation.

The locknut must be correctly fitted to avoid water
leaks.

Avoid bends or kinks in the hose which could prevent
or slow down the water supply.

If the machine is connected to new pipes or pipes
which have not been used for a long time, you should
run the water for a few minutes before connecting the
inlet hose. This will prevent deposits of sand or rust
clogging the inlet hose filter.

COL08en

Installation instructions

Содержание DWS 935

























Результаты поиска

Содержание DWS 935

Отзывы:

Похожие инструкции для DWS 935

Бренды по названию

Популярные бренды

Zanussi DWS 935, Инструкция пользователя

Результаты поиска

Содержание DWS 935

Отзывы:

Похожие инструкции для DWS 935

Бренды по названию

Популярные бренды