background image

17

If after all these checks, the problem persists, contact
your local Service Force Centre, quoting the model
and serial number. This information can be found on
the rating plate located on the right hand side of the
dishwasher door (see picture).

Service and spare parts

In the event of your appliance requiring service, or if
you wish to purchase spare parts please contact your
local Zanussi Service Force Centre by telephoning:

08705 929929

Your telephone call will be automatically routed to the
Service Centre covering your post code area. Service
Centre addresses can be found in the accompanying
Customer Care book.

Before calling out an engineer, please ensure you
have read the details under the heading "Something
Not Working" and have the model number and
purchase date to hand.

In-guarantee customers should ensure that 
the checks under the heading “Something 
Not Working" have been made as the 
engineer will make a charge if the fault is 
not a mechanical or electrical breakdown.
Please note that it will be necessary to 
provide proof of purchase for any 
in-guarantee service calls.

Customer Care Department

For general enquiries concerning your Zanussi
appliance or for further information on Zanussi
products please contact our Customer Care
Department by letter or telephone as follows:

Customer Care Department

Zanussi

55-77 High Sreet

Slough

Berkshire

SL1 1DZ

Tel: 08705 727727

GAR02en

Prod.No. ........ Ser. No. .........

Mod. ........

RA01

Содержание DWS 39

























Отзывы: