Symptom
Fault code
Solution
The machine will not start
■
The door has not been properly closed.
■
The plug is not properly inserted in the
power socket.
■
Check the plug fuse.
■
There is no current at the socket.
The machine does not fill
“Rinse and Hold”
■
Ensure the water tap is open.
with water
programme light
■
Ensure the mains water supply has not
flashing very fast
been cut off.
■
The inlet hose may be squashed or bent.
Reposition the hose.
■
The inlet hose may be blocked.
Switch off the water supply, and clean
the filter.
The filters are blocked
“Intensive”
■
Clean the filters, refer to “Maintenance
programme light
and cleaning”.
flashing very fast
■
The spray arms are not rotating. Ensure
the crockery is loaded correctly.
The dishwasher will not drain
“Quick”
■
The drain hose may be squashed or
programme light
bent.
flashing very fast
Reposition the hose.
■
The sink may be blocked. Clear any
blockages.
■
The drain hose extension is not correct.
Follow the instructions for connecting to
the waste.
■
There is no vent in the end of the drain
hose.
General
“Normal” or “Economy”
■
Switch off the dishwasher.
programme light
Switch it back on and start the
flashing very fast
programme.
If the alarm reappears, call the local
Service Force Centre.
The machine is noisy
■
Dishes are rattling against each other,
refer to “Loading your machine”.
■
The spray arms are knocking against the
dishes. Refer to “Loading your machine”.
The door is difficult to close
■
The dishwasher is not level, or not
properly built-in.
Something not working
43
PSN03GB
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Force Centre, please carry out the
checks listed below.
The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the
cause of any problems.
If the “End of programme” indicator light on the control panel is off and you see the following signals:
In case of a fault, carry out the suggested corrective action, switch off the dishwasher, switch back on
and start the wash programme. If the fault code reappears, contact your local service Force Centre.
