background image

13

Clean the external surfaces of the machine and control panel
with a damp soft cloth. If necessary use only neutral
detergents. Never use abrasive products, scouring pads or
solvent (acetone, trichloroethylene etc....). 

Ensure that the seals around the door, the detergent and rinse
aid dispensers are cleaned regularly with a damp cloth.

We recommend every 3 months to run a 65°C wash
programme without dishes using detergent.

Cleaning the filters

The filters in the base of the washing compartment are to a
large extent self-cleaning. Nevertheless the filters should be
checked and cleaned from time to time. Dirty filters will
degrade the washing result.

1. Open the door, remove the lower basket.

2. The dishwasher filter 

system comprises a 
coarse/fine filter (A/B), a 
microfilter (C) and a flat 
filter (D). 
Unlock the filter system 
using the handle on the 
microfilter, and remove.

3. Turn the handle about 

1

/

4

a turn anticlockwise 

and remove.

4. Take hold of the 

coarse/fine filter (A/B) by 
the handle with the hole and 
remove from the microfilter (C).

5. Clean all filters thoroughly under running water.

6. Remove the flat filter (D) from the base of the washing 

compartment and clean both faces thoroughly.

7. Put the flat filter back in the base of the washing 

compartment.

8. Place the coarse/fine filter in the microfilter and press 

together.

9. Put the filter combination in place and lock by turning the 

handle clockwise to the stop. During this process ensure 
that the flat filter does not protrude above the base of the 
washing compartment.

Under no circumstances may the dishwasher be used
without filters.

To ensure a correct
working of the dishwasher,
NEVER try to remove the
upper spray arm.

If residues of soil have
clogged the holes in the
upper spray arm, remove
them with a toothpick.

Check that the SID is not clogged with detergent residue. If
necessary rinse it under running water after having removed it
from the basket by twisting it anticlockwise and pulling it
upwards.

Never use your dishwasher
without the SID dispenser.
Since SID also ensures
correct distribution of the
water to the upper spray
arm, running the
dishwasher without it will
impair the washing results.

Prolonged periods of non-operation 

If you are not using the machine for any period of time you are
advised to: 
1. Unplug the appliance and then turn off the water. 
2. Fill the rinse aid dispenser. 
3. Leave the door ajar to prevent the formation of any 

unpleasant smells. 

4. Leave the inside of the machine clean. 

Frost precautions 

Avoid placing the machine in a location where the temperature
is below 0°C. If this is unavoidable, empty the machine, close
the appliance door, disconnect the water inlet pipe and empty
it. 

Moving the machine 

If you have to move the machine (moving house etc....): 
1. Unplug it.
2. Turn the water tap off.
3. Remove the water inlet and discharge hoses.
4. Pull the machine out together with the hoses. 
Avoid over tilting the machine during transportation. 

Maintenance and cleaning

MA12

MA33

MA30

MA32

MA31

Содержание DE 6854





















Отзывы: