background image

- 8 -

If the machine is not working

The machine will not start.

The machine is not filling with water.

The machine will not drain.

Dishes not washed satisfactorily.

Visible lime deposits or white film on
the dishes.

The machine is noisy.

The dishes are not quite dry.

Is the door closed properly?

Has the machine no power supply?

Has the fuse blown?

Have you set the selector knob properly?

Is the water tap turned on?

Is the water tap turned on?

Has your domestic water supply been cut off temporarily?

Is the water intake hose kinked or blocked?

Is the filter inside the intake hose blocked?

Is the water pressure too low?

Did you open the door before the light went out and the 
cycle ended?

Is the drain hose kinked or blocked? 

Are the filters clogged?

Are the baskets too full?

Have the dishes not been arranged properly?

Does the spray arm not rotate?

Are the spray arm holes clogged?

Are the filters clogged?

Are the filters not in position?

Not enough detergent has been used or is it unsuitable?

Is the detergent old or has gone hard?

Is the rinse conditioner dispenser empty?

Is the washing programme selected too gentle?

Is the end of the drain hose submersed in waste water 
(in the sink?)

Has the rinse aid run out or is too little being used?

Are the dishes rattling against each other?

Is the spray arm knocking against the dishes?

Have the dishes been left too long inside the machine?

Symptom

Check

The door is difficult to close.

Is the dishwasher not level?

Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out
an engineer. Before contacting Service, please carry out the checks listed below.

Never attempt to repair the dishwasher yourself.
Repairs carried out by unauthorised or inexperienced
persons can cause injury or serious malfunctioning.

Содержание CDW 200













Отзывы: