35
PPoow
weerr ssw
wiittcchh ((aa))
Switches the appliance on and off.
To switch off, keep the button pressed for about 1
second.
FFrriiddggee::
Fig.5
T
Teem
mppeerraattuurree aaddjjuussttm
meenntt
bbuuttttoonnss//tthheem
moossttaatt ((bb))
Setting range: +2°C to + 8°C.
Press: the top button «+» to set a higher tempe-
rature or disconnect the fridge part. (in the
display you can see OF)
the lower button «-» to set a lower tempe-
rature.
Keep pressing until the desired temperature flas-
hes in the temperature display. The display will
then stop flashing.
T
Teem
mppeerraattuurraa ddiissppllaayy ((cc))
Shows temperatures between 0°C and +9°C. When it is
warmer than + 9°C, «OF» is displayed.
The temperatura display starts flashing when the refrige-
rator temperature is set.
The temperature varies in different parts of the cabinet.
The temperature display shows the average temperatu-
re inside the cabinet.
If the temperature is measured using a standard, single
thermometer, this should be put in a glass of water cen-
trally placed inside the cabinet. This will reflect the tem-
perature inside the food produts. Do not place the ther-
mometer hanging or lying directly on the shelf.
SSH
HO
OPPPPIIN
NG
G ((dd))
Use Shopping to refrigerate a large quantity of products.
When Shopping is switched on, the temperature is auto-
matically set to + 2°C.
«A» is then displayed in the temperature display and
the yellow indicator lamp lights. After about 6 hours,
Action Cool is switched off and the temperature gra-
dually returns to the previously set temperature. It is
possible to switch off Action Cool manually by pres-
sing the Action Cool button once more.
D
Doooorr ooppeenn aallaarrm
m ((hh))
If the door remains open for more than 5 minu-
tes, the red warning lamp starts flashing and
an audible alarm sounds.
To switch off the alarm:
Press the «alarm shut-off button». The red
warning lamp goes out when the door is clo-
sed.
IInnssiiddee LLiigghhtt::
(H) Fig. 4
This comes on when you open the refrigerator
door and goes off when you close it.
If you need get the bulb (see «IF SOMETHING
FAILS TO OPERATE») remove the protective
cover X, pulling its clip horizontally.
Fig. 4
Regulation and Control
Fig. 5
a
b
b
c
d
e
f
f
g
h