RACK TYPE DISHWASHERS
COMPACT RTCS 250
EBBD10
2010-05-28
The Company reserves the right to alter technical specifications without prior notice.
www.zanussiprofessional.com
ZANUSSI
P R O F E S S I O N A L
SPLASH HOOD-RIGHT SIDE-COMPACT RACK
TYPE
864247
864247
864247
864247
SPLASH HOOD-LEFT SIDE-COMPACT RACK
TYPE
864248
864248
864248
864248
KIT SILASTIC CURTAINS FOR RACK TYPE DW
864245
864245
864245
864245
KIT SANITIZ.(2 HEAT.EL)-SHORT CRT 250R/H
864167
864167
864167
864167
KIT AIR GAP FOR COMPACT RACK TYPE
864309
864309
864309
864309
KIT 9 BASKETS FOR 1-TANK RACK TYPE DW
867051
867051
867051
867051
KIT 6 BASKETS FOR 1-TANK RACK TYPE DW
867050
867050
867050
867050
EL.HOT AIR BLOWER-RIGHT-600MM-COMPACT
RT
864506
864506
EL.HOT AIR BLOWER-LEFT-600MM-COMPACT
RT
864507
864507
EL. DRYING TUNNEL-CORNER-R>L-COMPACT
RT
864520
864520
EL. DRYING TUNNEL-CORNER-L>R-COMPACT
RT
864521
864521
EL. DRYING TUNNEL-COMPACT RT-R>L-900 MM
864516
864516
EL. DRYING TUNNEL-COMPACT RT-R>L-600 MM
864518
864518
EL. DRYING TUNNEL-COMPACT RT-L>R-900 MM
864517
864517
EL. DRYING TUNNEL-COMPACT RT-L>R-600 MM
864519
864519
DRAIN KIT FOR COMPACT RACK
TYPE
864150
864150
864150
864150
BASKET FOR 5 HALF INSULATED TRAYS-RED
867005
867005
867005
867005
12 S/S PLUGS FOR
WASH.ARMS-MODUL/COMP.RT
864239
864239
864239
864239
RTCS250ERA
534324
RTCS250ELA
534325
RTCS250ERB
534326
RTCS250ELB
534327
ACCESSORIES
MODELS
OPTIONAL ACCESSORIES
�
Pre-wash is separate from wash zone with
less than 35°C water without detergent for
maximum dirt removal and incorporates
automatic partial drain.
�
In the wash zone all the soil is removed by
the combination of the mechanical washing
action by means of a powerful 450 litres /
minute self draining wash pump, the thermal
action of the heating elements that guarantee
a constant water temperature of between 55°
and 65°C and appropriate detergents. Wash
tank is pressed.
�
Rinse zone: clean water is used to
eliminate any trace of detergent from the
wash-ware.
�
As optional extra the RTCS250 can be
equipped with a drying zone for fast and
efficient drying.
�
Tanks are pressed with completely
rounded corners and sloping base to facilitate
cleaning.
�
Smooth surfaces.
�
304 AISI stainless steel front and side
panels, strainers and wash and rinse arms.
�
Wash arms and double tank filter (flat and
deep box) easy to remove.
�
Height adjustable stainless steel feet.
�
All models finished in top quality materials
with double skinned construction to aid
durability and reduce noise.
�
Self-draining wash pumps provide
maximum hygiene.
�
Easy access to the energy saving
condenser unit.
�
Large balanced inspection doors for easy
access to wash area.
�
Self-cleaning cycle in pre-wash, wash &
rinse zones.
�
Automatic start/stop function.
�
Simple electric control panel.
�
Counter balanced door with safety switch
and easy to grip handle.
�
Built-in rinse water heater to increase the
temperature of the final rinse water.
�
Electronic control panel with
autodiagnostic check control.
�
35mm thickness foam injection insulated
doors to reduce noise and reduce heat
dispersion.
�
Available with version equipped with
Energy Saving Device (ESD) to pre-heat the
incoming cold water and to save up to 12kW
of energy. ESD incorporates a condenser
unit to decrease temperature and humidity of
the outlet hot steam.
�
Separate pre-wash for lower detergent
and water consumption.
�
98% recyclable by weight.
�
CFC free packaging.
�
Low noise level.
�
Developed and produced in ISO 9001 and
ISO 14001 certified factory.
* For models without ESD, the installation is
recommended below a dishwashing hood to
convey steam.