background image

19

Regulation and Control

Temperature Regulator for Refrige-

rator:

«A»

Allows to adjust the temperature inside the refrigera-

tor according to use and external conditions.

• Pos. 1 = Minimum cold.

• Pos. 6 = Maximum cold.

• Pos. 

0

= Motor disconnected.

Interior light:

«H»

It switches on when opening the door and switches

off when closing the appliance. It also switchess off

turning the temperature regulator to “0” position.

When changing the light bulb, first remove the pro-

tective cover «X», by firmly holding the edge and

pulling it horizontally. (see point A2, «IF SOMETHING

DOES NOT WORK»).

Dinamic Refrigeration:

(some models

only).

The Dynamic Refrigeration System give, in the

fridge compartment, extra efficiency showed in:

• Quicker refrigeration.

• More homogeneous temperature.

DAC (Dynamic Air Cooling system) has been

mainly designed for hot weather (ambient tempe-

rature above 25°), and also when the refrigerator

is plenty of food.

To start working, push the switch.

When DAC is switched on, the cold production is

higher, thus you should turn the temperature

regulator to an adequate position to avoid excesi-

ve cold.

Содержание 275 L















Отзывы: