background image

Delay start button

Use the delay start button to delay the start of the washing

programme with an interval of 3 hours. Refer to the chapter

'Setting and starting a washing programme'.

Programme knob and on/off indicator light

• To set a washing programme, turn the programme

knob clockwise or anticlockwise. The programme

marker on the programme knob must agree with one

of the washing programmes on the control panel.
– The on/off indicator light comes on (position ON).

• To set the appliance to the off position, turn the pro-

gramme knob until the programme marker agrees with

the on/off indicator light.
– The on/off indicator light goes off (position OFF).

Washing programmes

Washing programmes

Programme

Degree of soil

Type of load

Programme description

Heavy soil

Crockery, cutlery,

pots and pans

Prewash

Main wash up to 70°C

2 intermediate rinses

Final rinse

Drying

Normal soil

Crockery, cutlery,

pots and pans

Prewash

Main wash up to 65°C

2 intermediate rinses

Final rinse

Drying

 

1)

Normal or light

soil

Crockery and cut-

lery

Main wash up to 65°C

Final rinse

 

2)

Normal soil

Crockery and cut-

lery

Prewash

Main wash up to 50°C

1 intermediate rinse

Final rinse

Drying

Any

Partial load (to be

completed later in

the day)

1 cold rinse (to avoid food scraps from stick-

ing).

This programme does not require the use of

detergent).

1) This is the perfect daily programme to clean a not fully load. Ideal for a family of 4 persons who only want to load breakfast and

dinner crockery and cutlery.

2) Test programme for test institutes. Please refer to separate leaflet supplied, for test data.

Consumption values

Programme

Programme duration

(in minutes)

Energy consumption

(in kWh)

Water consumption

(in litres)

85-95

1,8-2,0

22-25

105-115

1,5-1,7

23-25

30

0,9

9

4

 

Содержание 156985811-00-082009

















Отзывы: