Zanussi Electrolux ZERC 2425, Инструкция пользователя

Страница: 14 / 16

3
CONTENTS
Instructions for the User
Important Safety Information
2
Operation
4
Before use 4
Setting the temperature 4
Fresh food refrigeration 4
Normal operating sounds 4
Movable shelves 5
Positioning the door shelves 5
Hints and Tips
6
Maintenance and Cleaning
6
Internal cleaning 6
External cleaning 6
When the appliance is not in use 6
Changing the light bulb 7
Defrosting 7
Something Not Working
8
Service and Spare Parts
9
Customer Care
9
Guarantee Conditions
10
Instructions for the
Installer
Technical Specification
11
Installation
12
Positioning 12
Rear Spacers 12
Electrical Connection
13
Door Reversal
14
Disposal of old Appliances
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it shall be handed over to
the applicable collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused
by inappropriate waste handling of this product. For
more detailed information about recycling of this
product, please contact your local city office, your
household waste disposal service or the shop where
you purchased the product.
14
Door reversal directions
1. Disconnect from the electricity supply.
2. Gently lay the fridge on its back with the top held
away from the floor by 5-8 cm (2-3 inches) of
packing;
3. Remove the bottom hinge (1) retaining screws
and remove the foot (2);
4. Slide out the fridge door from pin (G), unscrew
the latter and then refit it on the opposite side;
5. Unscrew the foot on the left side and refit it on the
opposite side;
6. Remove the two screws which mask the holes for
fixing the hinge from the left hand side;
7. Refit the door and the lower hinge (1) and the foot
(2);
8. Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch. Cover
the holes left open with the plugs supplied in the
documentation pack.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdryer on a low setting.
PR228
1
2
G