Zanussi Electrolux ZDT 6053, Руководство пользователя

Страница: 10 / 32

10
Setting the water softener electronically (see table)
The water softener is factory set at position 5.
The dishwasher must
be switched off.
Switch on the
dishwasher by pressing
the On-Off button. The End of cycle light
might flash 5 times, for
example. The flashing is
repeated every 5
seconds.
To change the level,
press the
Programme/Cancel
button. Each time the
button is pressed the
level increases. (Level 1
follows level 10).
The End of cycle light
indicates the new
setting.
To memorise the
operation, switch off the
dishwasher by pressing
the On-Off button.
Press and hold
Programme/Cancel
button until programme
light
1 flashes and
programme light 2
illuminates with fixed
light.
Wait until programme
light
2 turns off,
programme light 1 goes
on flashing and
simultaneously
End of
cycle light starts
flashing. The number of
flashes of the
End of
cycle light corresponds
to current level set
156997 18/0en 27-10-2006 15:39 Pagina 10