Zanussi Electrolux ZCG7540, Инструкция пользователя

Страница: 2 / 36

2
IMPORTANT SAFETY INFORMATION
These warnings are provided in the interests of your
safety. Ensure that you understand them all before
installing or using the appliance. Your safety is of
paramount importance. If you are unsure about any
of the information in this book contact the Customer
Care Department.
INSTALLATION
The appliance must be installed according to the
instructions supplied. The installation work must be
undertaken by a competent person as stated in the
Gas Safety (Installation & Use) Regulations current
editions and the IEE Wiring Regulations.
The appliance should be serviced by an authorised
Service Engineer and only genuine approved spare
parts should be used.
It is important that the appliance is suitable for your
gas supply. Your installer should check the rating
plate.
Make sure that a stability bracket is fitted.
The appliance must be installed in an adequately
ventilated room.
If the appliance is to be placed on a base, measures
must be taken to prevent the appliance from slipping
from the base.
This appliance is heavy and care
must
be taken
when moving it.
Do not
attempt to lift or move this appliance by the
handles.
All packaging, both inside and outside the appliance
must be removed before the appliance is used.
It is dangerous to alter the specifications or modify
the appliance in any way.
After installation please dispose of the packaging
with due regard for safety and the environment. Your
local authority can arrange this.
CHILD SAFETY
Do not
allow children to play with any part of the
packaging.
Do not
allow children to sit or climb on the drop
down doors.
This appliance is designed to be operated by adults.
Young children must
not
be allowed to tamper with
the controls or play near or with the appliance.
CAUTION: Accessible parts may be hot when the
grill is in use. Young children should be kept
away.
DURING USE
This appliance is not intended to be operated by
means of an external timer or separate remote
control system.
This appliance has been designed for domestic use
to cook edible foodstuffs only and must
not
be used
for any other purposes.
Take great care when heating fats and oils as they
will ignite if they become too
hot.
When you are lighting any burner check that it is lit
before you leave the appliance. When turning off a
burner,
do not
leave the appliance until the flame
has gone out.
Never place plastic or any other material that may
melt in or on the oven.
(NG models only)
Do not
leave the grill pan handle
in position when grilling as it will become
hot
.
(NG models only) Always use oven gloves to
remove and replace the grill pan handle when
grilling.
Always support the grill pan when it is in the
withdrawn or partially withdrawn position.
Always use oven gloves to remove and place food in
the oven.
Ensure
cooking utensils are large enough to contain
foods to prevent spillages and boil overs.
During use the appliance becomes hot. Care should
be taken to avoid touching the heating elements
inside the oven.
Ensure
that all vents are not obstructed to ensure
ventilation of the oven cavity.
Never
line any part of the appliance with foil.
Always
stand back from the appliance when
opening the oven door to allow any build up of steam
or heat to release.
Never leave the appliance unattended when the
oven doors are open.
Do not
place sealed cans or aerosols inside the
oven. They may explode if they are heated.
Ensure that all control knobs are in the
OFF
position
when not in use.
Do not
stand on the appliance or on the open oven
doors.
Do not
hang towels, dishcloths or clothes from the
appliance or its handles.
Do not
use this appliance if it is in contact with
water.
Never
operate it with wet hands.
CLEANING AND MAINTENANCE
For hygiene and safety reasons this appliance
should be kept clean at all times. A build-up of
fats or other foodstuffs could result in a fire
especially in the grill pan.
Do not
leave cookware containing foodstuffs, e.g.
fat or oil in the appliance in case it is inadvertently
switched on.
Do not
disconnect the appliance from the gas
supply if the supply pipe does not have a bayonet
connection as described in the installation section. If
this is the case contact the person who installed the
appliance.
Always
allow the appliance to cool before switching
off at the wall prior to carrying out any
cleaning/maintenance work.
Only clean this appliance in accordance with the
instructions given in this book.