60
Occasionally check defrost water outlet not to be
clogged up.
The most typical case of clogging up in the defrost
water outlet when you put food wrapped in some
paper into the appliance and this paper contacts back
plate of fresh food compartment and freezes to it. If
you remove the food right at this moment the paper
will tear and it can cause clogging up in the outlet by
getting into it. So you are asked to be careful -
because of the above - when placing foods wrapped
in paper into the appliance.
In case of increased demand e.g. during
heatwaves, the refrigerator temporarily happens
to operate constantly. During this the automatic
defrosting is ineffective.
Remaining small ice and frost stains on back plate of
the fresh food compartment after defrosting period is
not abnormal.
The frozen food compartment can not be equipped
with automatic defrosting set since the deep-frozen
and frozen foods do not endure melting temperature.
So the enclosed plastic scraper is for scraping off and
removing frost and ice coating which possibly occurs
in the frozen food compartment and on the sealing of
the door.
The tray in figure is not a piece of accessories to the
appliance!
When ice coating is so thick that it can not be removed
with the plastic scraper, the frozen food compartment
has to be defrosted (generally 2-3 times a year).
Take the foods out of the frozen and fresh food
compartment, wrap them into some layers of paper or
cloth. Put them to a possible cool place while
defrosting.
Break the circuit of the appliance and leave the doors
of frozen and fresh food compartment open.
Continuously blot off the defrosting water by a soft
cloth or sponge.
After defrosting wipe the surfaces, apply voltage to the
appliance and put the foods back to their places.
It is recommended to operate the appliance at the
highest position of the thermostatic control so that it
can reach the proper storing temperature as soon as
possible.
Regular cleaning
It is recommended to wash the inside of the
refrigerator in 3-4 weeks time.
Household cleaner or soap must not be used.
After you made it no-current wash the appliance using
lukewarm water and wipe it.
Clean the magnet door rubber profile with clean water.
GB
