29
1. Check that the baskets have been
loaded correctly and that the spray
arms can rotate freely
2. Turn on the water tap
3. Close the dishwasher door
4. Press the On/Off push button
The On/Off indicator light will come on.
5. Setting and starting the programme
Press the push button corresponding to the required
programme (see "Washing programmes" chart).
The indicator light corresponding to the programme
illuminates and the phase indicator lights foreseen for
that programme start flashing.
It is possible to change the programme selection simply
pressing the push button of another programme within 6
seconds.
Once the programme has started the phase indicator
lights will turn off except for the phase under way.
6. Interrupting/cancelling a washing
programme
Change or interrupt a washing programme in
progress ONLY if it’s absolutely necessary
To interrupt a washing programme
Attention! Hot steam may escape when the door is
opened. There is risk of scalding. Open the door
carefully.
●
Open the dishwasher door; the programme will stop.
Close the door; the programme will start from the
point in which it was interrupted.
●
pressing the On/Off (in this case all the indicator
lights turn off). Press the On/Off push button again;
the programme will start from the point in which it was
interrupted.
To cancel a washing programme
A programme in progress can be cancelled at any time.
Press for about 3 seconds the push button of the running
programme until all indicator lights are off.
Only the On/Off indicator light will remain illuminated.
It is now possible to select a new washing programme.
7. End of the washing programme
The dishwasher will automatically stop and the end of
programme phase indicator light will illuminate.
The indicator light of the programme just ended will
remain on.
The dishwasher has finished the programme only when
the end of programme indicator light is illuminated.
If you do not wait for the end of the programme it will not
be possible to start a new programme until the previous
programme has been cancelled.
(For instructions on how to cancel a programme see the
corresponding instructions).
If during the drying phase (drying indicator light
illuminated) the dishwasher door is opened or the On/Off
push button is pressed, the running programme is
automatically cancelled and the machine returns to
setting mode (in this case it is possible to select a new
programme without cancelling the previous)
Switch off the dishwasher by pressing the On/Off push
button, the On/Off indicator light turns off.
Hot steam may escape from the appliance when opening
the door immediately after the end of the programme,
therefore, open the door carefully.
Unloading the dishwasher
Hot dishes are sensitive to knocks. The dishes should
therefore be allowed to cool down before removing from
the appliance.
Leave the dishes in the dishwasher for approx. 15
minutes, with the door ajar, after the end of programme
so that they dry better and will be cooler.
Empty the lower basket first and then the upper one; this
will avoid water dripping from the upper basket onto the
dishes in the lower one.
When the washing programme has finished, it is
recommended that the dishwasher is unplugged and the
water tap turned off.
Starting a washing programme
