4
Front View — Transmitting Unit CV-57G-TX
HDMI-IN: Connect to a HDMI source with a HDMI M-M cable here
Mode: 0 = HDMI mode with surround sound audio output
1 = HDMI mode with stereo audio output
2 = DVI mode
3~5 = Reserved
6 = Use default EDID*
7 = Learn EDID from the display
1. Please connect the display which you want to read EDID with a HDMI cable to the transmitter’s
HDMI-IN and turn Mode to 7 so the TX can learn the EDID information from the connected HDTV. The
LED on the RJ45-OUT of TX will dim and light again in a few seconds, which indicates the EDID learning
process is completed.
Note for EDID (Extended Display Identification Data) learning
2. Turn Mode clockwise from Mode 7 to Mode 0 or Mode 1 for desirable audio setting and enjoy the
experience. DO NOT let the rotary arrow pass by Mode 6 which will erase the EDID just learned and
restore the default EDID.
Rear View — Transmitting Unit CV-57G-TX
+5V DC: Connect to 5V DC power supply.
RJ45-OUT: Plug in a CAT-5/5e/6 LAN cable that needs to be linked to the RJ-45 connector of the receiving unit
CV-57G-RX.
Panel Descriptions
HDMI-IN
Mode
RJ45-OUT
+5V DC
