WHEN HANDLING THE
WATER CONNECTIONS
Read the following points to make the process safe and worry-free
• All water pipes must comply with applicable national, state and local water pipe codes.
• No matter how you install the appliance, upright or the other way around, please connect
the inlet connection (blue arrow points to) to the cold water inlet pipe. Then connect the outlet
connection (red arrow points to) to the hot water outlet pipe.
• The appliance should be connected directly to the main water supply. Flush the pipe with
water to remove any debris or loose particles.
• It is suggested that you use G1/2” water connections to fit the appliance. Please connect
the inlet and outlet pipe accordingly.
• Please remember to install rubber seal rings at the connections. When all water connections
are completed, check for leaks and take corrective action before proceeding further.
9
Upward Installation Upside down Installation
45 C
45 C