ZANSKAR HOTSPRING HSHPM300 Скачать руководство пользователя страница 7

4

•  Heat Pump collects environmental heat via collector systems   
and refrigerant is circulated which absorbs the heat, boils and    
evaporates. 

•  Then compressor compresses the gas which raises the 
temperature & heat is passed to the heat exchanger. The heat 
exchanger helps exchange heat with the water in the cylinder. 
With the gained heat you can heat the water and get hot water 
throughout your home. 

•  Refrigerant has passed on its heat. So it has cooled off. 
It’s in liquid again.

•  This liquid passes to the expansion valve where the   
temperature drops and refrigerant can absorb heat again.

• This liquid passes to the expansion valve where the 
temperature drops and refrigerant can absorb heat again.

The appliance has a freeze protection system. The freeze protection system will protect the 
water heater from damage, by preventing ice forming in the waterways of the water heater, in 
the occurrence of freezing.

how it works

Air from 

outside

Hot water

Low temp.

Compressor

Compressor

Water supply

Tank

      Air 

exchanger

Heat 

Exchanger

Throttling 

   device   

High temp.

freeze protection system

here’s a little info about the appliance

 

 

Содержание HOTSPRING HSHPM300































Отзывы: