20
6
Installation
6.1
1
P lates
The unit is supplied with warning and attention plates as listed in the relevant table.
6.2
2
Dimensions
A
B
C
D
SPO 121-123
357
337
620
614
SPO 221
390
427
820
1034
SPO 135
427
427
820
1693
6.3
3
Location
To obtain optimal operation of the unit act as follows:
A)
Place the unit in a well ventilated room, far from heat sources.
B)
Limit the number of door openings.
C)
Make sure that the unit has good air supply and discharge.
D)
Fit a drain line to the defrost water drain connection in the lower part of the evaporator.
6.4
4
Free room
When installing the unit leave enough free room to allow opening, correct use and easy maintenance in safe
conditions.
6.5
5
Installation
Place the condensing unit on the floor
Install the evaporator as follows:
A)Drill the holes in the ceiling keeping the necessary distance from the wall.
Solution 1
Solution 3
Solution 2
Installation in a
coldroom with
more than one unit
