ZANOLLI SYNTHESIS 12/80V E, Руководство по установке, использованию и обслуживанию

Страница: 11 / 60

4. INSTALLATION
SYNTHESIS E 11
4.4. Positionig the unit on its base
Position the oven by sliding it into the
four corners of the basement (Fig.2).
4.5. Positioning stacked units
FOR THE UNITS THAT CAN
BE STACKED ONE ON TOP OF THE
OTHER SEE ENCLOSURE B.
Once the first oven has been
positioned on the base (see previous
paragraph), overlap consecutively the
second and third module fit the chimney exhaust fumes and by matching
the exterior side walls of the ovens.
4.6. Electrical connection
Before making any connection, check that the specifications of the
electrical supply to which the equipment must be connected, correspond to
the specifications of the power supply required by the apparatus itself (see
Enclosure A).
The appliances are supplied with an electric connection with
ground/earth cable for connecting the appliance to the power grid
according to the supply required (see Enclosure A).
In compliance with the safety norms in force. It is obligatory to connect
the ground/earth cable (yellow-green) to an earthing system with the
same dispersion capacity as the appliance itself. The efficiency of this
system must be correctly verified according to the norms in force.
The power cable must terminate with a plug to connect to the electrical
switchgear having a corresponding differential magneto thermal switch.
The equipment is not supplied with a power plug.
2