ZANOLLI SYNTHESIS 08/50 V PW GAS, Руководство по установке

Страница: 19 / 68

5. OPERATION
SYNTHESIS GAS 19
By confirming, you leave the programming mode and return to the
previous mode.
5.4. Programming
5.4.1. Cooking programs
It is possible to manage up to 6 different cooking programs. Each can be
set in the following order:
1. Cooking time (minutes : seconds)
2. Temperature setting (°C).
These parameters are normally indicated on the display when the oven
is on.
With the oven turned on it is possible to modify all the programs that can
be set, with the oven turned off it is only possible to modify the last
program that has been used.
Turn on the oven and press the key to
select the programme to modify (Fig.9).
Press the programming access key to
enter the programming mode and move from
one parameter to the next (Fig.10).
A horizontal line flashes below the parameter
being programmed.
The program that is being modified is always
indicated at the top right of the display
To change the value, use the keys to
increase and to decrease (Fig.11).
By keeping the key pressed, you increase the
speed of data change.
If no key is pressed for more than 5 seconds,
the displayed value is memorised and the oven
automatically leaves the programming mode.
During the programming of the
and keys are disabled, the key exits
programming mode.
The order of programming is as follows:
1. Cooking time
2. Temperature
9
10
11