ZANOLLI CITIZEN EP 70/4+4, Руководство по установке, использованию и обслуживанию

Страница: 6 / 35

2. HOW TO USE THIS MANUAL
6 CITIZEN EP70
2. HOW TO USE THIS MANUAL
This manual should be kept near to the equipment itself so it can be
quickly and easily consulted. The manual must travel with the equipment if
it is moved to another owner as the latter may not be considered complete
or safe without it.
Please take note of the code and revision numbers which are behind the
back cover. If this copy should get mislaid or destroyed you can order
another one by referring to the codes.
This manual is divided up into a number of chapters. All of these
should be read by the installers, maintenance staff and the final user, both
in relation to its
safe use
and in order to obtain the best result from this
product.
Despite this we also give below some useful indications on how to look
things up quickly in the various chapters.
The paragraphs with this symbol contain essential safety
information. They must all be read both by the installers and by the
final user and any of his staff who may use the equipment. The
manufacturer shall not be held liable for any damage which may
occur as a result of failure to observe the norms indicated in these
paragraphs.
The paragraphs with this symbol contain important information which
can be used to avoid damage being caused to the equipment. It is the
user’s own interest also to read these paragraphs ca
refully.
Chapter 3
describes the field of use of the equipment and provides the
characteristics and figures which may be needed when choosing, installing
and using it. It should be used as a reference to check the use which is
intended to be made of the equipment corresponds to that for which it was
designed, and whenever it is necessary to know an exact size value
relating to the equipment.
Chapter 4
provides all the information necessary for the installation of
the equipment. The manual is primarily written for specialised staff but may
be read in advance also by the final user to prepare and set up the space
and plant necessary for the proper working of the equipment.