_______________________________________________________________4. INSTALLATION
____________________________________________________________________________
11
CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC ELECTROMECHANICAL VERSION
Figure 4.1.Cooling openings
4.2 Choosing a place for installation
An effective, safe and long lasting functioning of the appliance also
depends on the position in which it is installed. For this reason, it is advisable
to carefully consider where to install the equipment before it is delivered
Install the appliance in a dry and easily accessible place both to facilitate its
use and to carry out cleaning and maintenance. The area around the
equipment must be kept clear. It is particularly important to avoid obstructing
the cooling outlets located at the sides of the equipment.
The appliance must be installed
at least 20cm from the walls of the
room or from other equipment so that
the ventilation outlets located on the
sides of the oven are not obstructed.
Whilst in operation, cooking equipment
produces vapor and cooking smells that
compromise the integrity of a healthy
working environment.
In the case of electric ovens, even if it is not obligatory, the installation
of an extraction fan and hood is recommended to improve conditions in the
working environment and to avoid damage to the ceiling of the area where it
is housed caused by hot, oily fumes.
A check must be made to ensure that the temperature and relative
humidity never exceed the maximum and minimum values indicted in the
specifications (see paragraph 3.4) even when the oven itself or other ovens
in the room are functioning.
Exceeding these values especially the temperature or the maximum
relative humidity can easily and unexpectedly damage electrical equipment
creating hazardous situations.
The manufacturer cannot answer for damage caused by ignoring
these abovementioned norms as well as the information in this manual.
