_________________________________________________________________5. WORKING
____________________________________________________________________________
19
CITIZEN 6 - 9/MC, CITIZEN 6+6 - 9+9/MC ELECTROMECHANICAL VERSION
To press a second time this push-button
in order to exit from the way
programming temperature.
5.2.7
and
buttons
By pressing and releasing these buttons once, the set temperature
increases or decreases by one unit. By keeping them pressed, the set
temperature increases or decreases progressively, slowly at first and then
faster.
5.2.8
OUT display (vers. TERM0012)
The
display turns on every time the baking chamber temperature is
below the set temperature. It turns off when the cooking chamber
temperature reaches the set temperature and goes on again when the
baking chamber temperature goes 1° C below the set temperature.
When the
display is on, the baking chamber heating elements turn on
according to their power settings.
5.2.9
“out1“ display led green (vers. TERM0060)
The “
out1
” display led green turns on every time the baking chamber
temperature is below the set temperature. It turns off when the cooking
chamber temperature reaches the set temperature and goes on again
when the baking chamber temperature goes 1° C below the set
temperature.
When the “out1”
display is on, the baking chamber heating elements turn
on according to their power settings.
5.2.10
Power regulators
Each baking chamber has two power regulators, one connected to the
oven roof heating elements, and the other one to the bedplate heating
elements. These regulators ensure an even distribution of the heat inside
the baking chamber so as to obtain an even cooking.
Each power regulator controls the power of its own heating element,
regulating the start up time of the heating element within a range of 30
seconds.
If the power regulator is set on 10, its heating element will be on for 3
seconds and off for 27 seconds ( provided the
is on). If the power
regulator is placed on 50, its heating element is on for 15 seconds and off
