ZANKER ZKT 3110S, Инструкция по установке и эксплуатации

Страница: 25 / 35

121
... the whole indicator section for residual heat, except
h
, will fail
all of a sudden?
Check, whether
– the On/Off button has been operated accidentally.
– the touch controls are entirely or partly covered by liquid or by a wet
cloth.
– the safety cut off has operated.
... after cooking zone switch-off the display will not show
j
or
h
for residual heat?
Check, whether
– the cooking zone has only been in operation for a short while, and is
therefore not hot enough.
If the cooking zone is hot, please contact your local Service Force
Centre.
... a cooking zone cannot be switched on?
Check, whether
– the child-safety (symbol
L
) is switched on.
... the display
f
flashes?
3
The front left cooking zone has been temporarily cut off by the elec-
tronic control to protect against overheating. The zone cannot be re-
activated until the appliance has cooled down (
f
goes off). The other
three cooking zones will continue to function.
... all displays (inclusive of residual heat indicator
h
) go out dur-
ing cooking?
The overheating protection of the electronic controls has blocked the
use of the hob. Once the cooking zone has cooled down it can be op-
erated again.
... the display
f
lights up?
Check, whether
– the touch controls are entirely or partly covered or contaminated by
liquid or by a wet cloth.
Clean the ceramic glass surface and wipe it dry.
Switch off the automatic safety cutout briefly or unscrew the fuses.
If the
f
display continues to be illuminated please contact customer
services.
If after carrying out the above checks your appliance is still faulty, dis-
connect from the mains supply and contact your local Customer Serv-
ice Centre.