manualshive.com logo in svg

ZANKER ZKS 5618 IE, Инструкция

Поделиться
Скачать
ZANKER ZKS 5618 IE Скачать руководство пользователя страница 6

3. Salt refill indicator light

This light illuminates when the salt has run out, to
remind you to refill the salt container.

4. "Hot prewash" indicator light

This light illuminates when you select a
programme with hot prewash.

5. Digital display

6. "Programme selector" button

To select the required programme, press this
button until the number corresponding to the
chosen programme appears in the digital display
(see "Washing programmes" chart).

7. "Half load" pushbutton 

By pressing this button, washing can be
concentrated to a single basket instead of both:
the indicator light corresponding to the basket
selected comes on.

This is very useful and economical when only a
few dishes need washing.

Remember to load all the dishes into the basket
selected.

If both indicator lights are out, washing will be
carried out in both baskets (default setting).

8. "Economy drying" pushbutton

By pressing this button you can opt to shorten or
completely eliminate the drying cycle, so making
a considerable energy saving.

With the programme nr. 1 the drying options are
not available.

If both pilot lights are out, the full drying cycle
will be carried out (default setting).

9. "Delay start" button 

Allows the start of the programme to be delayed
by a minimum of 1 hour, up to 12 hours.

How to set the "Delay start":

When the button is pressed, in the display
appears "h 00". 

Press the button again to select the number of
hours by which you wish to delay the programme
start, up to a maximum of 12.

The delay start will not modify the settings made
previously.

If, during the countdown, you wish to check on
the display the programme selected, press the
"Programme selector" button.

10. “Cancel” pushbutton

If you wish to cancel a programme which is
already running, or the delay start after the
countdown has started, press this button for
about 2 seconds until a short signal is heard: in
the display appears "---" indicating that the
previous setting has been cancelled, then
appears the number of the last programme and
the options selected.

A new programme and/or a new delay start may
be selected. 

31

PCP42GB

Содержание ZKS 5618 IE




























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды