
Problem
Possible cause
Solution
It is too warm in the freezer
Temperature Regulator may be set
incorrectly
Set a lower temperature
The door does not close tightly or it
is not shut properly
Check if the door closes well and the
gasket is undamaged and clean
Large quantities of food to be fro-
zen were put in at the same time
Insert smaller quantities of food to be
frozen at any one time.
Food placed in the appliance was
too warm
Allow food to cool to room tempera-
ture before storing.
Products to be frozen are placed
too closely to each other
Place the products in a way so that
cold air could circulate among them
It is too cold inside the freez-
er
Temperature Regulator may be set
incorrectly
Set a warmer temperature
The appliance does not
work at all. The appliance
does not cool at all. Neither
cooling nor lighting works
The appliance may be switched off
Switch on the appliance
Plug is not connected to the mains
socket properly
Connect the mains plug properly
Power does not reach the appliance Try connecting another electrical de-
vice to the power outlet
There is no voltage in the mains
socket (try to connect another appli-
ance into it)
Call an electrician
Replacing the lamp
Caution!
Disconnect the plug from the mains
socket.
1. Remove the
screw from the
lamp cover.
2. Remove the lamp
cover (refer to the
illustration).
3. Replace the used
lamp with a new
lamp of the same
power and specifi-
cally designed for
household appli-
ances (the maxi-
mum power is
shown on the
lamp cover).
4. Install the lamp cover.
5. Tighten the screw to the lamp cover.
6. Connect the plug to the mains socket.
7. Open the door. Make sure that the light comes on.
22