ZANKER KUAK88ES, Руководство пользователя

Страница: 7 / 32

Control panel
1 2 3 4 5
1
Power indicator light
2
Temperature regulator and On/Off switch
3
Super light
4
Super switch and alarm reset switch
5
Alarm light
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator clockwise to a
medium setting.
If the temperature inside the appliance is too high, the
Alarm light will blink and the acoustic alarm will turn on.
3. Push the Super switch and the acoustic alarm will
turn off. The Alarm light will blink until the internal
temperature has reached a level required for the
safe conservation of frozen food.
Switching off
1. Turn the Temperature regulator to the "O" position.
The Power indicator light will switch off.
2. Remove the plug from the wall socket.
Temperature regulation
The temperature is regulated automatically. However,
you can set a temperature inside the appliance yourself.
Choose the setting keeping in mind that the temperature
inside the appliance depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
A medium setting is generally the most suitable one.
To operate the appliance:
1. Turn the temperature regulator clockwise to obtain
a lower temperature inside the appliance.
2. Turn the temperature regulator counterclockwise to
obtain a higher temperature inside the appliance.
Super function
The Super is used to perform pre-freezing and fast
freezing in sequence of Freezer compartment. This
function accelerates the freezing of fresh food and, at
the same time, protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate the Super
function at least 24 hours before placing
the food to complete pre-freezing.
To switch on the function:
1. Press the Super button for 2-3 seconds to activate
the Super function. The Super light will switch on.
2. Place the food in the freezing compartment and
keep the Super function switched on for further 24
hours. Refer to "Freezing fresh food" section.
This function stops automatically after 52
hours. It is possible to deactivate the
function at any time by pressing the
Super switch for 2-3 seconds.
High temperature alarm
When there is a temperature increase in the freezer
compartment (e.g. due to a power failure) the Alarm
light is blinking and sound is on.
The sound can be switched off at any time by pressing
the Alarm reset switch.
When normal conditions are restored the Alarm light
stops blinking and the sound turns off automatically.
7