19
Door reversibility
1. Unplug the appliance from the power supply
before carrying out the below-mentioned
operations.
2. Remove the ventilation grill (D).
3. Remove the bottom hinge (E).
4. Remove the door by releasing it from the top
hinge pin (D).
5. Remove the pin (A) and the washer (B) from the
top hinge (C), then mount these on the opposite
side, after having removed the plugs which must
be refitted on the other side.
6. Refit the door.
7. Screw down the bottom hinge (E) on the opposite
side.
8. Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
9. Re-assemble the ventilation grill (D).
10.Unscrew the handle. Refit it on the opposite side
after having pierced the plugs with a punch.
Cover the holes left open with the plugs
contained in the documentation pack
Warning:
After having reversed the opening direction of
the doors check that all the screws are properly
tightened and that the magnetic seal adheres to
the cabinet. If the ambient temperature is cold (i.e.
in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the
gasket or accelerate this process by heating up the
part involved with a normal hairdrier.
E
F
D
F
F
F
PR220
C
B
A
PR19
