Zane zTrack One Скачать руководство пользователя страница 2

 

 

www.zane.hu 

 

 

Safety information 

Read the operating instructions before setup the device. 
Connection, mounting, and setting may only be performed by trained persons. 
Not a safety component in accordance with the EU Machinery Directive. 
Not a device for absolutely reliable tracking or positioning. 
When commissioning, protect the device from moisture and contamination.

 

These operating instructions contain information required during the life cycle of the sensor. 

Correct use 

zTrack One is a GPS tracker which uses the LoRaWan network. The device is a revolutionary small 
LoRaWAN based GPS tracking device with a button. The  device  is  widely  used  to  track  pets, 
children,  bicycles,  elderly  people,  bags,  assets. The device will send a message to the LoRaWAN 
network when the button pressed. When the GPS tracking is enabled this message will contain 
coordinates too.  From this point any kind of event can be applied to a button press, it is up to the 
application, and the opportunities are endless. 

Enabling the built-in accelerometer, the device can detect when it is moved. First of all, if there is no 
movement,  the  tracker  sends  keepalive  packets  to  the  gateway  every  60  minutes  by  default  (this 
period can be set from 60 minutes to 6 hour). When movement occurs, the tracker activates itself. If 
the GPS enabled, the GPS is able to locate the device, the coordinates will be reported to a LoRaWAN 
network. In addition, if the GPS receives no coordinates within a specified time, then the module will 
only send a short message that motion happened. 

Specifications 

Frequency Band: 

867,1 

 868,8MHz ISM (SKU-EU) 

902.000 MHz to 928.000 MHz 
(US) 

Number of 
Channels: 

Configurable 8 channels (SKU-
EU) 

Battery Specs: 

Rechargeable via uUSB 
 3.7V 190 mAh LiPo 

Transmit Power: 

+14 dBm (25 mW) (EU) 
up to +18.5 dBm high efficiency 
PA (US) 

Receive 
Sensitivity: 

-141 dBm (EU) 
-146 dBm (US) 

Antenna: 

Built-in 

Operating 
Temperature: 

-

10ºC ~ 50ºC

 

Protection 
Requirements: 

IP51 

Dimensions: 

L:53 x W:39 x H:11mm 
(Weight: 25g) 

LED indicator: 

Configurable (Activity, 
Charging) 

 

Disassembly and disposal 

The sensor must be disposed of according to the applicable country-specific regulations. Efforts 
should be made during the disposal process to recycle the constituent materials (particularly 
precious metals). The sensors contain a lithium battery, which must be disposed of separately. 

 

 

Содержание zTrack One


















Отзывы: