H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany • Phone +49 241 9105010
Fax +49 241 91050138 • [email protected] • www.zander-aachen.de
8
Operating Manual ZX20T/TP/TC
3.3
Appropriate use
The ZX20T, ZX20TP and ZX20TC PLCs have been designed for the use in ma-
chines and plants for industrial use. They must be installed in switch cabinets or
appropriate housings with minimum protection class of IP54. The approved operating
parameters for use must be complied with (see paragraph 12 "Technical Data").
The controllers can be integrated into an existing network or build a new network via
the Ethernet port. Within the network all controllers operate with equal rights
(multimaster).
With PROFINET the controller ZX20TP can be connected as a slave.
With EtherCat the controller ZX20TC can be connected as a slave.
3.4
Disclaimer and warranty
If the conditions above are not complied for the intended use, the safety instructions
are not followed, or maintenance work is not performed as required, it will lead to a
disclaimer or loss of warranty.
3.5
Function
The function of the device depends on the loaded user program. The logic stored in
this program determines how the input signals are evaluated and the outputs switch.
Note:
The user is responsible for the integration of the device into the overall
system. For this, the correct electrical installation and the correct pro-
gramming of the ZX20T, ZX20TP or ZX20TC must be verified.
