10
H. ZANDER GmbH & Co. KG • Am Gut Wolf 15 • 52070 Aachen • Germany
Tel +49 241 9105010 • Fax +49 241 91050138 • [email protected] • www.zander-aachen.de
M08
E61-456-00
Product
-
identification e.g.:
EC Declaration of
Conformity
Versions &
Accessories
Put into operation
Maintain
Repair
Disposal
Before the final commissioning of the control system, a qualified specialist must verify that the electrical connection and pro-
gramming and, if necessary, the networking have been carried out correctly. It is recommended to execute the program se-
quence first with the voltage for the actuators switched off and to verify the correct function at the LEDs for the outputs.
Warning:
Incorrect electrical connection or programming can lead to unpredictable operating states and result in fatal or serious injuries
and high material damage.
The ZX09 series controllers and the ZX20/21 series controllers are not suitable for functional safety tasks. Therefore, if dange-
rous movements or hazardous conditions are possible in the entire plant, a risk assessment must be carried out in accordance
with the Machinery Directive. If additional measures are to be taken with regard to functional safety, approved safety compo-
nents such as emergency stop devices or safety door monitors must be provided, which enable the safe shutdown of the
corresponding drives independently of one of the mentioned controls. Suitable components for this purpose can be obtained
from ZANDER.
Correct installation provided, maintenance work is not necessary. Repairs to the device may only be carried out by the manu-
facturer. Opening the device by the user will result in the loss of any warranty or guarantee claims.
For a possibly necessary replacement, it must be ensured that the new control unit is provided with the identical user program
before it is put into operation again.
Description
Item.-no.:
Set of plug-in terminals with lateral cable
exits for ZX09
589270
Set of plug-in terminals with lateral cable
exits for ZX09A
589271
Set of plug-in terminals with lateral cable
exits for ZX09B/C
589272
Set of plug-in terminals with lateral cable
exits for ZX09D/E
589273
Set of plug-in terminals with lateral cable
exits for ZX20/21
589070
Imprint
Meaning
Type description (e.g.)
ZX09
Ident-No. (e.g.)
589200
Produktion year (e.g.)
2020
Serial number (e.g.)
X999999
Manufacturer address
H. Zander GmbH & Co. KG
Am Gut Wolf 15
52070 Aachen
www.zander-aachen.de
Quick Start Guide ZX- series
