www
.ledix.pl
RGB controller
1
÷
10 V
SLR-13
10
÷
14 V DC
Cet Lighting Sp. z o.o.
PL 43-200 Pszczyna, ul. Zielona 27, Poland
tel: +48 32 449 15 00, fax: +48 32 449 15 02
e-mail: [email protected], www.ledix.pl
10÷14 V DC / 0,1W; IP20
weight: 27 g
Declaration of Conformity is on www.ledix.pl
RGB controller
1
÷
10 V
SLR-13
The symbol means selective collecting of electrical and electronic equipment.
It is forbidden to put the used equipment together with other waste.
SLR-13 controller is designed to control RGB LED diodes in the common “+” system (LEDIX
series standard RGB fittings, strips and RGB modules) supplied with 1 ÷ 10 V DC. There is
a wired control in cooperation with a potentiometer in 1 ÷ 10 V standard. Characteristic
features:
• in cooperation with a potentiometer in 1 ÷ 10 V standard with the connector function, it
realises 3 RGB diodes control programmes: fluent colour selection - realised by turning the
potentiometer’s knob, fluent brightening/dimming, switching on/switching off,
• light switching off realised by turning the potentiometer to the minimum,
• three transistor (MOSFET) outputs with a maximum capacity of 2,5 A / output
• a 9-bit resolution control guarantees fluent colour changes,
• easy adaptation and control of RGB LED products supplied with 10 ÷ 14 V DC in installa-
tions with dimmers in 1 ÷ 10 V standard,
• small dimensions (easy mounting in the Ø60 junction box),
• low power consumption in the standby mode - a device designed for a continuous opera-
tion.
Mounting in a Ø60
junction box
Mounting
indoor only
Cooperation with
a potentiometer
in 1÷10 standard
SLR-13 ENG Ver. 01
SCAN
the technical
data
