VER. 001_10.07.2009
GUARANTEE CARD
FUNCTIONING
EXAMPLE OF INSTALLATION
CONNECTING
PCM-02/U time relay cooperates with the WZM-01 twilight switch and with SRM-10 roller blinds con
-
troller. Its function is impulse generation at dusk. This impulse is a signal for the roller blinds controllers
(central closing input) and for moving down all the roller blinds working in the same group.
MOUNTING
1. Disconnect the power supply from the ma
-
ins by the phase fuse, the circuit breaker or
the switch disconnector that are joined to the
proper circuit,
2. Check if there is no voltage on connec
-
tion cables by means of a special measu
-
re equipment,
3. Install PCM-02/U device in the switchboard
on TH 35 DIN rail,
4. Connect the cables with the terminals accor
-
ding to installing diagram,
5. Switch on the power supply from the mains,
6. Adjust the time using the
TIME
and
RANGE
knobs, where
t=TIMExRANGE
.
Switching on the power supply voltage cau
-
ses the green LED luminosity. The cycle wil be
automatically initiated with the adjusted t time.
DIMENSIONS
PRODUCT FAMILY
PCM-02/U time relay belongs to PCx time
relay product family.
RELAY CAPACITY
INNER DIAGRAM
U
t
t
SWITCH OFF DELAY - after the supply voltage [U] has been
applied, the output relay [R] switches on immediately (pos.11-
14), and the preset time [t] is measured. After the preset time
[t] has been measured, the output relay [R] returns to the initial
state (pos.11-12).
U
Diodes’ function
description
Time adjustment example t
☼
elay switched off
(closed contacts 11-12),
time measure off
1
10
5 6
7
8
9
2
3
4
TI
ME
0,1s
OFF
1s
10s
1min
10min 1h 10h
1d
ON
RA
NG
E
t
=
TIME
x
RANGE
,
t = 8 x 1 d = 8 d
☼
☼
relay switched on
(closed contacts 11-14),
time measure on
(flashing diode)
TI
ME
1
10
5 6
7
8
9
2
3
4
0,1s
OFF
1s
10s
1min
10min
1h
10h
1d
ON
RA
NG
E
t
=
TIME
x
RANGE
,
t = 3 x 1 h = 3 h
12 ÷ 240 V AC/DC
L(+)
N(-)
TWILIGHT/SUNRISE
DETECTION
ROLLER BLINDS
CENTRAL CLOSE IMPULSE
LOCAL CONTROLL
ROLLER BLINDS
CENTRAL OPEN IMPULSE
ROLLER BLINDS
MOTORS START
There is 24 months guarantee on the product
Salesman stamp and signature, date of sale
1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product.
2. The manufacturer’s guarantee does not cover any of the following actions:
a) mechanical damage during transport, loading / unloading or under other circumstances,
b) damage caused by incorrect product mounting or misuse,
c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices
needed for the product functioning,
d) damage caused by Act of God or any other incidents independent of the manufacturer.
3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J.
4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation.
5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return.
6. The manufacturer’s guarantee is valid in the Republic of Poland.
7. The PURCHASER’s statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or
otherwise are not affected by this warranty.
Voltage type:
24V - 24 V AC/DC
U - 12÷240 V AC/DC:
available for
PCM-01, PCM-02, PCM-03, PCM-06
U - 24÷250 V AC; 30÷300 V DC:
available for
PCM-07
Device type:
01 - 1 operating mode – switch on delay
02 - 1 operating mode – switch off delay
03 - 1 operating mode – cyclic change over
04 - 8 (PCP-04) or 10 (PCM-04) operating
modes
06 - 2 operating modes - switch on/ switch
off delay
07 - 25 operating modes, digital, two ranges of
time operation
10 - 10 operating modes, two ranges of time
operation
Casing type:
M - modular version (TH 35 DIN rail)
P - flush junction box Ø60 version
Device symbol