PROGRAMMING “GLOBAL TIME”
Each new button assigned to the specific channel in the ROM-22 receiver in time mode operates using “global time”. By default the global time for channel 1 (CH1)
and channel 2 (CH2) is set to 10 s. The user can change the global time within the range from 1 s to 18 hours. After changing global time for the specific channel,
the buttons registered with this output in time mode will operate automatically with new value for global time. Exception: individual times assigned to buttons during
programming stage.
The global time value can be adjusted from the receiver using the PROG button and also from the mobile app if the receiver is paired with the EXTA LIFE controller.
PROGRAMMING GLOBAL TIME
using PROG button
Changing global time for channel 1 (CH1)
1. Briefly press (1 s) the PROG button on the receiver; “CH1” LED lights up.
2. Wait approx. 2 s until STATUS LED lights up. After the STATUS diode lights up, wait approx. 5 s until the STATUS diode goes off.
3. After the LED turns off, briefly press PROG within 5 s. The STATUS LED will start blinking which signals time measurement.
4. After the time you want to program as the new “global time” for channel 1 has passed, again briefly press PROG.
5. The global time programming procedure is now complete which will be confirmed by blinking STATUS LED and the “CH1” diode going off.
Changing global time for channel 2 (CH2)
1. Briefly press (1 s) the PROG button on the receiver; “CH1” LED lights up.
2. Briefly press (1 s) the PROG button on the receiver again; “CH2” LED lights up and “CH1” LED will turn off.
3. Wait until STATUS LED lights up. After the STATUS diode lights up, wait approx. 5 s until the LED goes off.
4. After the LED turns off, briefly press PROG within 5 s. The STATUS LED will start blinking which signals time measurement.
5. After the time you want to program as the new “global time” for channel 2 has passed, briefly press PROG again.
6. The global time programming procedure is now complete which will be confirmed by the blinking STATUS LED and the “CH2” diode going off.
REMOTE PROGRAMMING OF GLOBAL TIME
using mobile application
Remote change of global time for each of ROM-22 receiver’s output is also possible using mobile app. To do so, first pair the receiver with an EXTA LIFE system
controller. After successful pairing, the ROM-22 receiver will be visible in the system as 2 channels (Channel 1 and Channel 2). To set global time for a channel,
select “Configure” from the editing menu. You will be transferred to the configuration screen where you can set basic parameters for the specific receiver channel.
For global time, set the “Global time” parameter. This parameter can be set from 1 s to 18 h using the following format — hour : minutes : seconds (xxh : xxm :xxs).
SELECTIVE DELETION OF RECEIVER’S MEMORY
In the EXTA LIFE system receivers, you can use selectively delete buttons from the receiver’s memory. This enables deleting only the selected buttons without the
need to clear the complete memory of the receiver. You can delete buttons using PROG or remotely using the EXTA LIFE app.
DELETING RECEIVERS USING PROG BUTTON
Selectively deleting buttons (or button pairs for on/off mode) from channel 1 of the receiver:
1. Press PROG and hold it for approx. 5 s; the STATUS LED will be lit.
2. After STATUS LED goes off, “CH1” LED will come on. Then, release the PROG button and wait approx. 2 s until STATUS LED lights up.
3. After STATUS LED comes on, within 5 s you must briefly press the button assigned to channel 1 to delete it from the receiver’s memory. If the button pair has
been assigned using on/off mode, just press one of these buttons.
4. After pressing the button, the STATUS LED will start blinking which informs that you entered deleting procedure. Completion of the deleting procedure is sig-
nalled by the STATUS and “CH1” LEDs going off.
Selectively deleting buttons (or button pairs for on/off mode) from channel 2 of the receiver:
1. Press PROG and hold it for approx. 5 s; the STATUS LED will be lit.
2. After STATUS LED goes off, “CH1” LED will come on. Next, briefly press (1 s) the PROG button again; “CH2” LED will light up and “CH1” LED will turn off.
3. After that, wait approx. 2 s until the STATUS LED comes on again.
4. After STATUS LED comes on, within 5 s you must briefly press the button assigned to channel 2 to delete it from the receiver’s memory. If the button pair has
been assigned using on/off mode, just press one of these buttons.
5. After pressing the button, the STATUS LED will start blinking which informs that you entered deleting procedure. Completion of the deleting procedure is sig-
nalled by the STATUS and “CH2” LEDs going off.
DELETING TRANSMITTERS USING EXTA LIFE APP (REMOTE)
The receiver from which you want to remotely delete receivers’ buttons must be paired with an EXTA LIFE controller. To remotely delete buttons from the receiver’s
memory, do the following:
1. From a receiver’s (channel) editing menu, select “Configure” (1).
2. At the setup screen, press the key “Assigned Transmitters” (2) to download the list of transmitters currently stored in its memory (3).
3. By pressing the name of a transmitter you can view details on the record in the receiver’s memory displayed its entry into the memory of the receiver (numbers
of entered keys, operating mode, assigned time for time mode).
4. By selecting “Delete” from the transmitter’s editing menu, you delete the transmitter buttons from the receiver’s memory (4). You can also delete a transmitter
by moving an element to the side.
REMOTE PROGRAMMING USING EXTA LIFE APPLICATION
The remote programming function for receivers enables the assigning of the transmitter’s buttons to the selected receiver’s channel, without actual access
to the receiver, i.e. without the need to press the PROG button on the receiver). This is particularly convenient when the receivers are already installed in
a location and it is difficult to access them.
Requirements for remote programming transmitters with ROM-22 receiver:
- An EXTA LIFE controller installed in the system,
- The receivers you want to assign to the receiver are supplied with power and paired with a controller,
- The transmitters to be remotely assigned to receivers must be paired with the controller,
- During one step only one transmitter can be remotely assigned to a receiver.
To remotely assign selected buttons on a transmitter to the specific channel, do the following:
1. Pair the receiver with controller.
2. Pair the transmitter with the controller, this applies to the transmitter whose buttons you want to remotely assign to the receiver.
3. On the transmitter select “Assign receiver”
.
4. From the list of all paired receivers select the receiver (channel) to which you want to remotely assign the transmitter
.
5. In the “Operating Mode” field set the mode for use by the transmitter working with the receiver (channel)
. The available modes for ROM-22 are: on/
off, bistable, monostable, time.
6. Select the transmitter’s buttons for remote assignment to the receiver
. In case of time mode, you must also declare time assigned to the selected
button. The time range available is from 1 s to 18 h.
7. Pressing “Transmitter preview” button brings up a transmitter’s view with button numbers shown
.
8. Press “Save” to remotely program the transmitter into the receiver. After the correct completion of the operation you will see the message “The devices
have been paired”.
Remote assignment of a transmitter to receiver can be also executed from the receiver level. In this situation, select “Assign transmitter” from the receiver’s
(channel’s) editing menu.
If you are programming time mode, the following situations are possible:
1. “On button” and “off button” are the same — receiver (channel) activation and deactivation before the programmed period is executed using the same
button (in this example, it is “1” on the RNK-22 transmitter).
2. “On button” and “off button” are different — the “on” button only activates the receiver (channel) and “off” button only deactivates the device before pro-
grammed time elapses.
3. “off button was not defined — the situation is the same as the one described in section 1.
Step_2:
Programming the time assigned to the selected button in time mode (for output-2)
1. Briefly press (1 s) the PROG button on the receiver; “CH1” LED lights up.
2. Briefly press (1 s) the PROG button on the receiver again; “CH2” LED lights up and “CH1” LED will turn off.
3. Wait approx. 2 s until STATUS LED lights up. After the STATUS diode lights up, wait approx. 5 s until the STATUS diode goes off.
4. After the LED goes off in less than 5 s, briefly press the transmitter button assigned to the channel 2 in time mode. (This refers to the transmitter you
want to program time).
5. The STATUS LED will start blinking which signals time measurement.
6. After a period of time you want to assign to the specific button has passed, briefly press the button on the transmitter again.
7. The time programming procedure is now complete which will be confirmed by blinking STATUS LED and the „CH2” diode going off.
The time assigned to a button can only be changed through its reprogramming.
