VER. 003_20.05.2011
RADIo TRANSMITTERS’ PRoGRAMMING - CHANNEL 1
TIME PRoGRAMMING - CHANNEL 1
RADIo TRANSMITTERS’ PRoGRAMMING - CHANNEL 2
RADIo TRANSMITTERS DELETIoN
CooPERATIoN AND oPERATING RANGE
Symbol:
RoP-01 RoP-02 RoB-01 SRP-02 SRP-03 RWG-01 RWL-01 RoM-01 RoM-10 RDP-01 RTN-01
RNK-02
180 m
200 m
200 m
200 m
200 m
250 m
180 m
250 m
250 m
180 m
250 m
RNK-04
180 m
200 m
200 m
200 m
200 m
250 m
180 m
250 m
250 m
180 m
250 m
P-256/8
230 m
250 m
250 m
250 m
250 m
300 m
200 m
300 m
300 m
230 m
300 m
P-257/4 (2)
180 m
200 m
200 m
200 m
200 m
250 m
180 m
250 m
250 m
180 m
250 m
RNM-10
230 m
250 m
250 m
250 m
250 m
300 m
200 m
300 m
300 m
230 m
300 m
RNP-01
160 m
180 m
180 m
180 m
180 m
200 m
160 m
200 m
200 m
160 m
200 m
RNP-02
160 m
180 m
180 m
180 m
180 m
200 m
160 m
200 m
200 m
160 m
200 m
RNL-01
160 m
180 m
180 m
lack*
lack*
200 m
160 m
200 m
200 m
160 m
200 m
RTN-01
200 m
200 m
200 m
200 m
200 m
250 m
200 m
250 m
250 m
200 m
250 m
RCR-01
160 m
180 m
180 m
lack*
lack*
200 m
160 m
200 m
200 m
160 m
200 m
RTI-01
160 m
180 m
180 m
180 m
180 m
200 m
160 m
200 m
200 m
160 m
200 m
RXM-01
230 m
250 m
250 m
250 m
250 m
300 m
200 m
300 m
300 m
230 m
300 m
* - 1-channel transmitters do not cooperate with roller blind controllers.
CAUTION: The given range concerns open area - an ideal condition without any natural or artificial obstacles. If there are some obstacles between a transmitter
and a receiver, it is advisable to decrease the range according to: wood and plaster: from 5 to 20 %, bricks: from 10 to 40 %, reinforced concrete: from 40 to 80 %,
metal: from 90 to 100% , glass: from 10 to 20 %, over- and underground medium and high electrical power lines, radio and television transmitters, GSM transmitters set
close to a device system have also a negative influence on the range.
oPERATIoN
The device can operate in five modes for both channels:
MoNoSTABLE
the relay operates only
while pressing transmit-
ter’s push-button.
BISTABLE
(one push-button) the
device changes relay
status cyclically always
after pressing the same push-
button.
SWITCH oN
the device switches on
after pressing the push-
button.
SWITCH oFF
the device switches off
after pressing the push-
button.
TIME
the device switches
off according to the
adjusted time (tp),
but it may be switched off before
adjusted time finishes. Default
settings - 15 seconds.
CAuTIoN! Adjusted time can-
not be deleted.
Choose one of ROM-10 operation modes and programme the device in an analogous way as for channel 1,
but press PROG 2 push-button and watch LED diode for channel 2.
Time programming for channel 2 - programme the device in an analogous way as for channel 1, but press PROG 2 push-button and watch
LED diode for channel 2.
Maximum time is 18 hours.
MoNoSTABLE
mode:
BISTABLE
mode:
SWITCH oN/SWITCH oFF
mode (two push-buttons):
TIME
mode (one push-button):
An exemplary programming procedure with the use of P-257/2 remote controller. The procedure for the rest of radio EXTA FREE transmitters
is analogous.
CAuTIoN: Every transmitter can cooperate with RoM-10 in a different mode, depending on how they were added to the device.
one transmitter can be added during one programming cycle. Full memory is signalled with pulsating LED red diode.
Press transmitter’s
push-button for
a longer time.
Press the transmitter’s push-button
for a longer time. LED red diode switches on
(first signal pulsates, next the signal is constant).
Press PROG push-button of ROM-10
device and then release it. LED red diode
switches on (first signal pulsates,
next the signal is constant).
Press and release transmitter’s first
push-button. LED red diode switches on
(first signal pulsates,
next the signal is constant).
Release transmitter’s
push-button. LED red diode
switches on (first signal
pulsates, next the signal
is constant).
Release transmitter’s push-button. LED
red diode switches on (the signal pulsates),
next the LED red diode switches off - it
means the TRANSMITTER IS ADDED.
Press and release the same transmitter’s
push-button. LED red diode switches on
(signal pulsates) and then switches off -
THE TRANSMITTER IS ADDED.
Press and release the second transmitter’s
push-button. LED red diode switches on
(the signal pulsates) and next it switches
off - THE TRANSMITTER IS ADDED.
Press the same transmitter’s
push-button and release it. LED red
diode switches on (the signal pulsa-
tes) and next it switches off - THE
TRANSMITTER IS ADDED.
Press PROG 1 push-button of ROM-10 device
for a longer time until LED red diode switches on
(constant signal). Next release PROG 1 push-button.
Press PROG 1 push-button of ROM-10 device
for a longer time until LED red diode switches on
(constant signal). Next release PROG 1 push-button.
Press PROG 1 push-button of ROM-10 device
for a longer time until LED red diode switches on
(constant signal). Next release PROG 1 push-button.
Press PROG 1 push-button of ROM-10 device
for a longer time till LED red diode switches on
(constant signal). Next release PROG 1 push-button.
Press PROG 1 push-button of ROM-10 device for a longer time
till LED red diode switches on (constant signal). Next release
PROG 1 push-button. Wait (for about 5 seconds) till LED red diode
switches on (first signal pulsates, next the signal is constant).
After the adjusted time is
finished (the number of LED
red diode flashes) press
PROG 1 push-button and
then release it -
TIME IS ADDED.
Press PROG 1 push-button of ROM-10
device and then release it. LED red diode
switches off and then switches on
(signal pulsates). Every LED diode pulse
equals 1 second.
Press PROG 1 push-button of ROM-10
device for a longer time.
After 5 seconds LED red diode switches on
(signal pulsates) and then it switches off.
Release the push-button in ROM-10
- MEMORY IS DELETED.
CAuTIoN: This procedure causes transmitters’ deletion from the memory of channel 1 and channel 2.
1s 2s
ns