FastICE Display
Operational “Dashboard” Display
Figure 3: Fast Ice Operational Screens
Water Application Rate Scaling
This allows the water flow calibration point to be increased or decreased for a given vehicle speed.
This parameter allows the operator to increase or decrease the ice thickness.
The factory-set system flow rates are 10.5 GPM from the Upper Boom and 3.8 GPM from the
Lower Boom at a 5 MPH reference speed. The total flow from both booms for these flow rates is
14.3 GPM.
Water Application Rate
Scaling -50/+50
Spray Thickness
Total Water Used
Water Level (%)
Ground Speed (MPH)
Soft key for resetting
water total
Ice Making Water
Temperature
Water Flow Rate
Water Spray Pressure
Rotary Adjustment
Knob [see note]
Training Manual
Zamboni FastICE
®
Training Manual
DK - 11001
Page 9 of 20
