※
The specifications of any product may change without prior notice to improve performance.
6
9. FAN MATE 2 Installation and Usage
1) FAN MATE 2 installation inside a System 2) FAN MATE 2 installation on the outside of a system
Connect the two 3-pin connectors of the
cable to the motherboard and to
CNPS8700’s Fan Connector as shown in
the diagram.
Pull the 6-Pin Connector out of the system
through the back and connect it to FAN
MATE 2, which should be installed on the
case using the included Double-sided tape.
◆
The fan operates in Silent Mode when the speed control knob of FAN MATE 2 is fully turned in the
counter-clockwise direction. The fan operates in Normal Mode when the speed control knob of FAN
MATE 2 is fully turned in the clock-wise direction. The fan speed can be controlled according to user
preference by adjusting the speed control knob.
Note)
FAN MATE 2 has been specifically designed for the fan of this product.
Zalman Tech Co., Ltd. is not responsible for any damages to the system or CPU resulting
from its use with other types of fans.
10. Notes on Usage
1) Checking CPU Compatibility
Please refer to
“
Compatible CPUs
”
on page 3 to confirm that your CPU is compatible with
CNPS8700 before using it.
2) Cautions During Booting
The computer system may automatically shut down when booting the computer after the system
monitoring program outputs a warning stating that the CPU fan is rotating slowly. In such a case,
fully turn the speed control knob in the clockwise direction before rebooting to disable the ‘CPU Fan
Detected’ option in BIOS, or set the CPU fan’s rotational speed to 1,150rpm or lower in the system
monitoring program.
Note)
Some motherboards fail to boot if the rotational speed of the CPU fan is below a certain rpm.
However, booting can be possible even at low fan rpm if the BIOS settings are updated. For
more information on updating your BIOS, please refer to the website of the motherboard
manufacturer. There are motherboards which fail to detect the rpm while operating the cooler
in Silent Mode, but this does not affect computing performance.
3) OVERCLOCKING
Zaman Tech Co., Ltd. is not responsible for any damages to the system and CPU resulting from
overclocking.
Fan Connector
(CNPS8700)
Motherboard
Double - sided Tape
Fan Mate 2
6-Pin Connector
