37
Press
“AP Client Setting”
1.
AP Client mode:
You could enable this function by selecting “Enable”.
2.
Network ID(SSID):
Network ID is used for identifying the Wireless LAN (WLAN). Client
stations can roam freely over this device and other Access Points that have the same
Network ID. (The factory default setting is “default”)
3.
Authentication:
Choose your authentication.
4.
Encryption type:
z
Auto
The AP will Select the Open or Shared by the client’s request automatically.
z
WPA-PSK
Select Encryption and Pre-share Key Mode
If you select HEX, you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits.
If you select ASCII, the length of pre-share key is from 8 to 63.
Fill in the key, Ex 12345678
z
WPA2-PSK
WPA2-PSK user AES and TKIP for Same the encryption, the others are same as the
WPA2-PSK.
