background image

3855 South 500 West Ste Q  |  Salt Lake City, Ut  | 84115 | 801.506.7081 

19

 

 

 

3.9 Pseudo N-Key Rollover Capability

 

‘N’ key roller is the numbers of keys that may be held depressed simultaneously 
and have the keyboard generate the appropriate code for each pressed and 
released key without keyboard interruption. The keyboard is capable of at least a 
pseudo 6-key rollover. All combinations of Ctrl, Alt and Shift keys are not ghost 
keys. 

 

3.10  Free From Illegal Ghost key

 

Key matrix layout has been properly managed such that no ghost key occurs for 
any 3-key combination. The ghost key is defined as 3-key combination where a 
valid third key falls in the ‘#’ pattern in the key matrix, formed by the proceeding 
valid 2-key combination. Normally in this case, the third key will be masked 
without sending any code because the third key and fourth key in this ‘#’ pattern 
are confusing the microprocessor of three keyboard. 

 

3.11 Compatibility

 

Operation System: iOS 8 
Bluetooth 3.0 LE specification compliant. 
Bluetooth HID profile V 1.1 compliant 
VID/PID in firmware is 0a5c/8502 

 

3.12 Battery 

Specification

 

 

3.14.1 Charging 

Specification

 

Charging current: 180mA 

 

3.14.2 Battery Capacity

 

A fully charged battery is discharged using an analyzer to get its capacity. The 
charging and discharging is done 3 times. The average measured capacity 
should be at least 80% of original capacity. 

 

3.14.3 Short time charging of Battery

 

The 30 minutes short time charging using the USB connected to a standard 110V 
outlet should provide a battery life of at least 20% of the rated capacity. 

 

 

 

3.14.4  Charging Profile of Battery

 

The charging profile of the battery charged by a particular method using wired 
charger/laptop/wireless charger should be good. It includes the time taken to fully 
charge the battery, average charging rate, and the charge capacity after being 
charged for 10 hours. The charged percentage of the measured cycled capacity 
should be at least 80%. 

 

3.14.5  Standby and Active time of Battery

 

Standby time should be a minimum of 1000 days.  Active time should be a 
minimum of 730 days, 1 hour per day average. 

Содержание Limitless



































Отзывы: