INSERTING/REMOVING YOUR Ellipsis™ 10
To insert your Ellipsis 10 into the Folio, start with the Folio’s
keyboard facing you. Then, with your tablet in landscape mode
and the volume control buttons facing up, set the bottom
half of your tablet in the cover (you may need to apply light
pressure to your tablet to ensure it is settled at the bottom of
the cover).
Next, snap the top half into the cover. Check all corners to
make sure they have seated properly.
To easily remove your tablet, grasp the top of the Folio’s cover
in the middle and apply a light pressure to the back of your
tablet. Grasp your tablet’s exposed side and lift/pull away from
the Folio.
1
POWERING ON AND OFF
To turn your Folio on, press the Power key. The green Power key LED will
illuminate briefly while the keyboard powers up. To turn your Folio off, press
and hold the Power key for two seconds; a red LED will light indicating your
Folio has powered off.
