Figure 1:d
Adjusting Rods
Figure 4:b
Operating your Recoil Handle
Rod lock for Zamerican
Arms, EVF Mounts,
or 15 mm rods
Coldshoe Jaws for
shoe accessories.
Threaded
Accessories
?
See front figure for full correct Assembly
Check out our tutorial videos at zacuto.com
For additional accessories visit store.zacuto.com
NEED
MORE
HELP
To change the angle of the Zwivel 2, loosen
levers and rotate. To lock, tighten lever until
pins lock into center wheel. Both halves can
be independently rotated a full 365 degrees.
Mount the 3” Z-Rail to the top of your camera using either the
camera’s cheese plate or mounting it directly to the camera.
Loosen tightening lever on the top of the grip
to adjust the grip’s position. Re-tighten lever
when in desired position.
Figure 2:a
Operating
Z-Grip Z-Mount Zwivel
Figure 3:a
Mounting Z-Rail
Align and remount allen screws to VCT
body. Adjust to desired height and
relock allen screws.
Flip front rods overfrom original position.
Remove both allen screws and seperate
front jeep with rods from VCT body.
For Red Epic/Scarlet flip the rod clamp riser.
1
2
3
Figure 4:a
Mounting your Recoil Handle
The jaws can be moved to either end of the handle or rotated 90 degrees
to help position the handle and/or accessories in a balanced position.
Remove allen screw and
jaws connected to handle.
Align jaws with rear mount,
and tighten allen screw in place.
1
2
Additional Recoil Options
Sold Separately
Mounting Axis Mini to Recoil Handle.
Mounting Z-Drive and Tornado
to VCT Rods
Rear rod supports can added for larger rigs requiring
batteries or additional accessories.
