Orient monitor as shown above.
Slide the front of the C100 Bracket into the coldshoe slot of the handle.
Tighten the top knob into place
to secure bracket to handle
When using the C100 bracket for
Z-Finder, screw the top knob into place.
Assemble the C100 Z-Finder by snapping the frame onto the Z-Finder Pro.
Slide the C100 Z-Finder with frame onto the C100’s LCD screen.
Tighten the knob on the C100 Bracket
to secure the Z-Finder in place.
The rod mount on the C100 Bracket can be used to mount your EVF,
or a rod support accessory.
Figure 3:a
Mounting
C100 Bracket
(Z-Finder Recoil)
Figure 3:b
Assembling C100 Z-Finder
(Z-Finder Recoil)
Figure 3:d
Focusing Z-Finder
(Z-Finder Recoil)
Figure 3:c
Mounting C100 Z-Finder to Bracket
(Z-Finder Recoil)
Figure 4:a
C100 Bracket for EVF
(EVF Recoil)
Figure 4:b
Mounting C100 Bracket with Mini Axis Mount
(EVF Recoil)
Figure 4:c
Opperating C100 Bracket
(EVF Recoil)
?
See front figure for full correct Assembly
Please visit www.zacuto.com for more support
For additional accessories visit store.zacuto.com
NEED
MORE
HELP
Assemble the C100 Bracket for
EVF if it is not already together.
1
1
2
1
2
3
Loosen racheting lever to
adjust the angle on the C100 Bracket.
Ne
arsighted
Farsighted
To focus the Z-Finder,
use the red diopter wheel
to focus on letters within
the camera menu.
Additional Recoil Options
Sold Separately
Mounting Z-Drive and Tornado
to VCT Rods
