Zacuto Canon C100 Z-Finder, Руководство по установке

Страница: 14 / 14

P a g e | 11
Connecting the C100 handle
What you will need : Zacuto shoulder mount (Fully assembled with the ikan viewfinder), C100 handle
(As assembled from part 1)
Finally, it is now time to attach the C100 handle.
Using the ratchet lever, on the left-hand side of the handle (shown), it should open and be able to
slide onto the rod arm adapter. Place this into a position where it does not conflict with the
viewfinder, you should be able to slide it forwards or backwards, then tighten in place.
Finally, to remove the rig from the tripod, push down on the small red clip and pull the release lever.
Doing this you should here another click, which indicates it is now released, then holding the top
handle of the C100, along with one of the Zacuto handle arms it should lift off.
Red clip on
side of plate